|
|
|
|
Common Questions about Rail Track Scale |
Q. How to detect the error in hardware equipments through the computer?
A. All data captured by the hardware equipments through the sampling channel and circuit, electronic article are transmitted into the computer for data processing so that the computer is able to make simple detection, such as: for return-to-zero, there is a difference compared as normal condition (recording for return-to-zero is required in normal), moreover, “o” and “ 65535” is indicated that there is a error in hardware equipment during the detection for sampling channel, in such case, please make correction by yourselves or contact with us. |
Q: Any requirements for weighing in normal?
A: During weighing, weighing body and load cell are under machining process that will be affected by the speed and the weight of wagon, so that relative uniform speed is required. Especially, sudden stop and sudden start, bump up and down are not permitted, otherwise, there is a great difference for weighing accuracy. |
Q: Are other operations able to be done in the computer during weighing?
A: Yes. But other operations should be avoided as possible as you can because some influences will be raised if weighing and other operations are done in the same time. |
Q: How about wagon No. Recognition system?
A: Wagon No. Recognition system is connected with the rail track scale, playing its function in direct or indirect. Wagon No. Recognition system is a extra system that can capture information about wagon No, type of wagon, the weight of wagon, calibrated weight by reading the label fixed in the wagon. There are two kinds of method; one is that information can be read while weighing, the other is that information can be read after weighing. |
Q: Is it easy to connect with LAN and WAN as well as TMIS etc?
A: The software system is DOS in the past, currently updated into Windows. It is easy to connect with TMIS, LAN, WAN, and also can send data into the Internet. Further information please contact with us. |
Q: How long can the data be kept?
A: Without man-made damage, these data can be kept as long as you can, at least 5-10 years if the hardware of computer is 20G — 80G . The speed of data processing will be reduced if more than 0.01million and 1million messages are kept. |
|
|
|
|
|
|
|
|
